Leading Retailers are choosing i2Systems’ LED display products because in-store tests have shown consumers purchase more merchandise illuminated by LED than not. Consider up to 75% energy savings and no maintenance for up to 5 years icing on the cake. Leading Millwork and Display OEMs are choosing i2Systems because our LED products are high performance, plug-and-play, and simple to install. Customization is available.
- Sell More Product using our LED fixtures as proven by in-store tests.
- Focused Light directly illuminates merchandise and adds sparkle to jewelry.
- Simple to Retrofit with plug-and-play connectors, new stores are even simpler.
- Small Profiles fit easily under shelves, in display cases, & under cabinet.
- Significant Energy Savings with accelerated ROI - pays for itself.
- Designed & Manufactured by i2Systems in the USA.
Linear LED Lighting
| Product | Description | Typical Applications | Environment | Datasheet |
|---|---|---|---|---|
|
V-Line Gen4 V4290 |
LED Linear Light for General Lighting, .6” x .6” Profile, 11” - 43” Lengths, Tight LED Spacing, cULus Listed
|
Cove |
Dry, Damp, Wet |
|
|
S-Line S1200 |
LED Linear Light for General Lighting, .75” x .75” Profile, 12” - 48” Lengths, cULus Listed
|
Cove |
Dry, Damp |
|
|
S-Line S2190 |
LED Linear Light for Display & Refrigeration Lighting, .75” x .75” Profile, 22” - 67” Lengths, cULus Listed
|
Display Case |
Dry, Damp |
|
|
SmartLED B1203 |
LED Strip for Display Case Lighting, .69” x .38” Profile, Plug Together 12” Length, Plug-and-Play
|
Display Case Retrofits |
Dry |
|
|
SmartLED B2190 |
LED Strip for Display Case Lighting, .69” x .23” Profile, 22” & 44” Lengths, Plug-and-Play
|
Display Case Retrofits |
Dry |
Recessed & Step LED Lighting
| Product | Description | Typical Applications | Environment | Datasheet |
|---|---|---|---|---|
|
Apeiron A1130 |
LED Recessed Light for General Lighting, 12V AC, 3” Diameter, Round & Square Trims, Stainless Steel, cULus Listed
|
General Lighting |
Dry, Damp |
|
|
Apeiron A1161 |
LED Recessed Light for General Lighting, 3” Diameter, Round & Square Trims, Stainless Steel, cULus Listed
|
Same as A1130 above. |
Dry, Damp |
|
|
SlimFit F1171 |
LED Recessed Light for Shelf & Under Cabinet Lighting, 3” Diameter, 5/8” Depth, 5 Finish Options
|
Millwork |
Dry |
|
|
R1160 |
LED Recessed Light for General Lighting, 2.5” x 2.5”, Anodized Aluminum, cULus Listed
|
Same as A1130 above. |
Dry, Damp |
|
|
R2160 |
LED Recessed Light for General Lighting, 2.5” x 6.4”, Anodized Aluminum, cULus Listed
|
Same as A1130 above. |
Dry, Damp |
|
|
Ember E1150 / E2150 |
LED Step Light w/ Asym. Beam, Round, Square, & Oval Trims, Snap or Screw Mount into 1.25” Round Cutout, Stainless Steel, IP67
|
Perimeter |
Dry, Damp, Wet |
Specialty LED Lighting
| Product | Description | Typical Applications | Environment | Datasheet |
|---|---|---|---|---|
|
Gooseneck G1300/G2300 |
LED Gooseneck Light, 1” Dia Light Head, Very Flexible, Aluminum, Clamp & Bolt-Thru Mounting, Connector
|
Display Case |
Dry |
LED Lighting Controllers
| Product | Description | Function | Environment | Datasheet |
|---|---|---|---|---|
|
LightLink LL-105-R |
LED Dimming Module with 0-10V Interface, 5” x 3” x 1.2”, Plug-In Terminal Block, Linear Dimming
|
Bridges conventional 0-10V dimming controllers such as Lutron, Crestron, and similar systems to LED Lights. 10V sink and source operation per IEC Dimming Standard. Momentary switch interface for standalone dimming is also provided. |
Dry |
|
|
LightLink LL-101 |
LED Dimming Module with Momentary Switch Interface, 1” x 1.5” x .5” Size Fits in Most Switch Boxes, Non-Linear Dimming, Potted
|
Press and hold momentary switch to initiate dimming cycle. Briefly press and release momentary switch for on/off operation. Switch not included. |
Dry, Damp |
LED Power Boxes
| Product | Description | Function | Environment | Datasheet |
|---|---|---|---|---|
|
E05C Power Box |
Baseline Power Box, Hardwire or Use w/ Included Molded Plug, 4x Output Connectors, Painted Steel Enclosure, 75 Watt Continuous Output, cULus Listed |
Connects to 120/240/277V AC and provides low voltage to i2Systems DC products. The E05C’s prewired molded cable connects to standard 120V North America receptacles. Hookup for up to 4 LED lighting circuits is accommodated by 4 prewired output connectors. |
Dry, Damp |
|
|
OEM Power Box |
100 Watt OEM Power Supply |
120/240/277V AC to 24V DC Ballast Style Power Supply for OEM installations. Recommended derating is 25% minimum. |
Dry, Damp |
|
|
E03 Power Box |
Transformer Box, Prewired Terminal Block, Zinc Plated Steel Housing w/ Cover, 30/50 VA models, cULus Listed |
120V AC to 12V AC toroidal transformer provides low voltage to i2Systems 12V AC products. Simple wiring is enabled via the prewired terminal block. |
Dry, Damp |
|
|
E05 Power Box |
Baseline Power Box, Hardwire or Use w/ Included Molded Plug, Painted Steel Enclosure, 75 Watt Continuous Output, cULus Listed |
Connects to 120/240/277V AC and provides low voltage to i2Systems DC products. The E05 provides simple operation and wiring - 3 wires in, 2 wires out. The included molded power plug for 120V North America receptacles provides additional convenience. |
Dry, Damp |




