Elevator & Escalator

view applications

i2Systems LED Elevator Products have quickly become the new standard in LED Elevator Cab Lighting. Offering the Total Solution, i2Systems was the first company to mass produce High Brightness LED Fixtures for Elevator Cabs and continues to lead the industry in technology development and innovative designs.

  • Perfect Color Consistency with LEDs placed In-House.
  • 8 Hours of Battery Backup weighing only 16 lbs.
  • Simple Push Button Dimming.
  • LED Fixtures are Easy to Install & Vandal Resistant.
  • Made in the USA.

*International Green Construction Code

 

Recessed LED Lighting

Product Description Typical Applications Environment Use Power Box Datasheet

Apeiron

A1161

LED Recessed Light for Elevator Lighting, 3” Diameter, Round & Square Trims, Stainless Steel, cULus Listed


5 Watts, Dimmable

Elevator Lighting

Dry, Damp

E01D
E06E

 PDF

Apeiron LTE

A4171

LED Recessed Light for Elevator Lighting, 3” Diameter, Round & Square Trims, cULus Listed


4 Watts

Elevator Lighting

Dry

E09

 PDF

Linear LED Lighting

Product Description Typical Applications Environment Use Power Box Datasheet

S-Line

S1200

LED Linear Light for General Lighting, .75” x .75” Profile, 12” - 48” Lengths, cULus Listed


6 Watts / Ft, Dimmable

Cove & Perimeter
Escalator Handrail
Linear Down Light

Dry, Damp

E01D
E06E

 PDF

S-Line

S2190

LED Linear Light for General Lighting, .75” x .75” Profile, 22” - 67” Lengths, cULus Listed


5 Watts / Ft

Cove & Perimeter
Elevator Control Box
Linear Down Light

Dry, Damp

E01D

 PDF

Escalator LED Lighting

Product Description Typical Applications Environment Use Power Box Datasheet
Demarcation

LED Linear Light for Escalator Demarcation, 18” Length, Simple Retrofit, cETLus Listed


7.5 Watts

Escalator Demarcation

Dry, Damp, Wet

N/A

 PDF

LED Lighting Controllers

Product Description Function Environment Datasheet

LightLink

LL-101-01

LED Dimmer for E01 Type Power Box.

Included connector plugs directly into E01 type power boxes. Press and hold E01 dimming switch to initiate dimming cycle. Non-volatile memory saves last dimming level, even with power cycle. Refer to each product for max LED lights per LL-101-01 (typ. 20).

Dry, Damp

 PDF

LightLink

LL-101-04

LED Dimmer & Battery Manager for E06E Type Power Box

Included connector plugs directly into E06E type power boxes. Press and hold E06E dimming switch to initiate dimming cycle. Non-volatile memory saves last dimming level, even with power cycle. LL-101-04 also manages battery charging and health. Refer to specific products for max LED lights per LL-101 (typ. 20).

Dry, Damp

 PDF

LED Power Boxes

Product Description Function Environment Datasheet

E01D

 Power Box

Power Box, Pre-wired w/ Terminal Blocks & Dimming Hookup, 120-240V AC Input, 45/75/120W Output, Painted Steel w/ Cover & Knockouts, cULus Listed

Pre-wired 60/100/150W power supply converts line voltage to 24V DC. Pre-wired terminal blocks provide simple hookup for home runs. Plug In a LightLink LL-101-01 dimmer to enable push-button dimming.  Power supply is derated to 45/75/120W continuous output.

Dry, Damp

 PDF

E06E

 Power Box

Battery Backup Power Box, Pre-wired w/ Terminal Blocks & Dimming Control, 120-240V AC Input, 45/75/120W Output, Painted Steel w/ Cover & Knockouts, cULus Listed

Pre-wired 60/100/150W power supply converts line voltage to 24V DC. Built in batteries provide up to 8 hours of run time (12V, 10W) and seamless switch over. Pre-wired terminal blocks provide simple hookup for home runs. Power supply is derated to 45/75/120W continuous output. LightLink LL-101-04 is required for normal operation.

Dry, Damp

 PDF

E09

 Power Box

Power Box, Pre-wired w/ connector, 120-240V AC Input, 45W Output, Galvanized Steel w/ Cover & Knockouts, cULus Listed.

Pre-wired 60W power supply converts line voltage to 24V DC. Includes connector for plug n’ play hookup to Apeiron LTE type wire harness. Special bottom knockouts offer flexible installation. Power supply is derated to 45W continuous output.

Dry, Damp

 PDF